Advertisement
CONNECTIONS
© Use for FM reception un-
til a special-purpose FM
antenna is installed.
© Stretch both ends taut
and affix to a wall, etc.
T-type antenna
antenna
® Unfold all four legs of the AM loop antenna
:
toward the outside, and insert the stopper
inside the legs into the hole in the AM loop
antenna to fix it in position.
Set the antenna
on a level surface, and
point in the direction that gives optimum
reception.
Do
not
install
the antenna
in locations
where it touches the cover of the unit or
other metal objects, or near a CD player,
personal computer, or television set.
Stretch taut and affix.
Accessory
AM Loop Antenna
CONNECTING THE FM
T-TYPE ANTENNA AND
AM LOOP ANTENNA
ll
1.
Strip the end of the wires.
2. Wrap the end of the wire in
a clockwise direction around
the base of the terminals and
tighten the terminals to
secure.
g~
Antenna ground
| Although grounding is not always necessary for reception, it is recom-
mended for protection against damage from lightning if an outdoor
FM antenna
is used.
Grounding
is recommended
as well to help
reduce noise and hum.
Connecting the power cord
NOTE:
Never make the ground connection to a gas pipe as sparks could
Plug the power cord into
cause the gas to ignite.
(UNSWITCHED)
the auxiliary
power outlet on the amplifier
or into an AC wall socket.
\
Pin plug connecting cord
*
Connect the white plug to the white terminal (L)
and the red plug to the red terminal (R).
¢
Make sure that there is a proper connection.
Red plug
Stereo amplifier
i
se
ag
i
4
<ARE1048>
Advertisement
