Advertisement
3. Remote control interface: support Toshiba receiving negotiation.
4. Control panel interface: 7 button control.
5. Sound output interface: sound signal output.
6. Program upgrading interface: upgrading program. Only for factory use.
6. Factory mode instructions
This chassis use new HYF-35R remote controller (grey, 41 button, can not share with the original blue 35
button HYF-35R ), the method to enter the factory mode is: Screen-----P.STD------S.STD------Sleep Time.
The following is the instructions of the factory menu of V2.1 version program.
WHITE BLA
White, dark balance adjustment
Name
R OFF
G OFF
B OFF
R GAIN
G GAIN
B GAIN
AUTO TUNE
FACTORY SET
Name
POWER STB
NOSYNC LOGO
BACK LIGHT
DLC TEST
TV BACK SCREEN
MCLK
PIP SIZE
INIT EEPROM
INIT TV
PICTURE MODE
COLOR TEMP
SOUND MODE
Never adjust the following other items
7. Structure dimension (see appendix 1)
Relevant dimension specifications of control panel PCB，The specification of screw hole: diameter 3.3mm
screw hole , the structure diagram of hole position
8. Transportation, storage and usage requirements
1. Never press heavily and bend
2. Eliminated static
3. Relative humidity: below 80%
Description
White balance adjustment
Dark balance adjustment
Automatic adjustment
Description
ON: power standby
Screen saver without signal ON: open OFF: close
Background light brightness adjustment of screen: 0-255
Automatic brightness control switch 1:open 2:close
Background without signal BLUE: blue screen BLANK: blank screen
SDRAM : clock impulse 120-166
adjusting.
PIP dimension MIDDLE: medium dimension LARGE: large dimension
Initialize EEROM
Initialised factory signal
Parameter of picture mode adjustment
Parameter of color temperature adjustment
Parameter of sound mode adjustment
OFF: standby memory
do not use
we recommend not
Advertisement
