Table of Contents
Advertisement
Quick Links
Porto-Power Blackhawk Automotive is a licensed trademark
Pulling Post Kit
Operating Instructions & Parts Manual
Model Number B93601B
Items included:
B93600B • 10 Ton Pulling Post
B65428
• Air Pump with Hose
B65444
• 10 Ton 10" Stroke Ram
B97662
• Chain & Claw Hooks (2pc.)
B97691
• Chain & Grab Hook
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Blackhawk Automotive Porte-Power B93601B
Summary of Contents for Blackhawk Automotive Porte-Power B93601B
- Page 1 Porto-Power Blackhawk Automotive is a licensed trademark Pulling Post Kit Operating Instructions & Parts Manual Model Number B93601B Items included: B93600B • 10 Ton Pulling Post B65428 • Air Pump with Hose B65444 • 10 Ton 10" Stroke Ram B97662 •...
- Page 2 If any component of this product has been or suspected to have been subjected to a load dropped suddenly, unexpectedly upon it, discontinue use until checked out by a Porto-Power Blackhawk Automotive Authorized Service Center. Labels and Operator’s Manuals are available from manufacturer.
- Page 3 Floating Pulley Support Bar Safety Chain 9' Pull Chain with Grab Hook, 3/8" 6' Chain with 2 Claw Hooks, 3/8" Secondary Safety Idle Pulley Recycling Lock Power Lever Arm Wheel Hydraulic Hose Air Hydraulic Pump 10 Ton Threaded Ram Oil Outlet Port, 3/8" Air Inlet Port, 1/4"...
- Page 4 WARNING • Do not use the safety chain under floating pulley • Study, understand, and follow all instructions provided with and on as a "pull" chain. this device before use. • On severe pulls, use secondary safety ties, strap • All WARNING statements must and blankets around chains.
- Page 5 OPERATION Note: The pull post is operated by a 10 Ton 10 inch stroke hydraulic ram attains 20,000 pounds of pull on the chain at 8950 psi pressure. Operate equipment from at least 6 feet from either side of post and chains. ALWAYS monitor pressure, load or position using suitable equipment.
- Page 6 MAINTENANCE 1. Inspect and replace damaged, kinked, twisted, stretched or rusty chain. 2. Inspect hoses and connections. Replace damage components immediately with Porto-Power Blackhawk replacement parts only. 3. Tighten connections as needed. Use non-hardening pipe thread compound when servicing connections. 4.
- Page 7 Chain with Grab Hook, 9’ x ID3/8” B97662 Chain with 2 Claw Hooks, 6’ x ID3/8” Figure 3 - Replacement Parts Illustration for B93601B When it comes to quality automotive tools, Blackhawk Automotive is the brand you can depend on.
Need help?
Do you have a question about the Porte-Power B93601B and is the answer not in the manual?
Questions and answers