Bluetooth (Pairing And Using A Phone For Uplevel Radio) - Chevrolet Silverado 4500HD 2022 Owner's Manual

170 Infotainment System
If the Bluetooth music playback is not
functioning, then check to see if the
Bluetooth device is in the waiting
screen mode.
Sounds may be cut off during the
Bluetooth music playback.
The infotainment system outputs the
audio from the cell phone or Bluetooth
device as it is transmitted.
Bluetooth (Pairing and Using a
Phone for Uplevel Radio)
For information about how to navigate the
menu system using the infotainment
controls, see Using the System (Base Radio)
0 112 or
Using the System (Base Radio with
Touchscreen) 0 114 or
Using the System (Uplevel Radio) 0 114.
Pairing
A Bluetooth-enabled cell phone must be
paired to the Bluetooth system and then
connected to the vehicle before it can be
used. See the cell phone manufacturer's user
guide for Bluetooth functions before pairing
the cell phone.
Pairing Information
A Bluetooth phone with music capability
can be paired to the vehicle as a phone
and a music player at the same time.
Up to 10 devices can be paired to the
Bluetooth system.
The pairing process is disabled when the
vehicle is moving.
Pairing only needs to be completed once,
unless the pairing information on the cell
phone changes or the cell phone is
deleted from the system.
One Bluetooth device can be connected to
the Bluetooth system at a time.
If multiple paired cell phones are within
range of the system, the system connects
to the paired cell phone in the order that
they were last used in the system. To link
to a different paired phone, see Linking
to a Different Phone later in this section.
Pairing a Phone
1. Touch the Phone icon on the Home Page.
2. Touch Phone and select Pair Device.
3. A four-digit Personal Identification
Number (PIN) appears on the display.
The PIN, if required, may be used in
Step 5.
4. Start the pairing process on the cell
phone to be paired to the vehicle. See
the cell phone manufacturer's user guide
for information on this process.
5. Locate Chevrolet MyLink on the
display. Follow the instructions on the
cell phone to enter the PIN provided in
Step 3 or confirm the six-digit code
shown on the display. After the PIN is
successfully entered or the code is
confirmed, the system responds with
<Device name> has been successfully
paired when the pairing process is
complete.
6. If Chevrolet MyLink does not appear,
turn the phone off or remove the phone
battery and retry.
7. If the phone prompts to accept
connection or allow phone book
download, select Always Accept and
Allow. The phone book may not be
available if not accepted.
8. Repeat Steps 1 7 to pair additional
phones.
Listing All Paired and Connected Phones
1. Touch the Phone icon on the Home Page.
2. Touch Phones.