Page 1
Support and E-Warranty Certificate https://www.vevor.com/support ELECTRIC WAX MELTER DTL-S007(A)、DTL-S007(C) 、DTL-S007(B) DTL-S010(A)、DTL-S010(C) 、DTL-S010(B) USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Page 3
CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appear- ance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. HOUSEHOLD USE ONLY This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union.
Page 5
Never place on a tilted surface. 11. Do not place the wax melter on or near hot surfaces. 12. Do not switch on the Wax melter, if the wax tank is empty. 13. Do not place the wax melter near gas stove, electric burner or heated oven.
or lack of experience or knowledge, unless they have been given supervision or instruction concerning the safe use of the appliance by a person responsible for their safety. PRIOR TO FIRST USE: Remove all packaging from the inside and outside of the wax melter air vent Cool-touch Lifting handles...
4. Replace the lid and turn clockwise to lock into place. 5. Connect the plug to the socket. 6. Switch ON. The Red "Heating" pilot lamp will light up and the wax starts to heat up. 7. The wax will reach the set thermostat temperature. 8.
beyond repair. Please note that the manufacturer will not guarantee for such negligent use of appliance. If resetting this thermal cut-out does not switch the appliance back on, please call for service or professional maintenance agent to have further check. This safety device may have been switched off during transport, if so reset the thermal cut-off following the above instructions.
Need help?
Do you have a question about the DTL-S007A and is the answer not in the manual?
Questions and answers