Subscribe to Our Youtube Channel
Related Manuals for Creative Play OCTAVIA OS117
Summary of Contents for Creative Play OCTAVIA OS117
- Page 1 OS117 - OCTAVIA CANOPY (4M) Installation Instructions REF: OS117 pg 1 of 10 26.07.2019...
-
Page 2: Parts Required
PARTS REQUIRED UPRIGHT MAIN TIMBER UMT - QTY x8 UPRIGHT TIMBERS x228 97.M8X80CSK 97.M8X120CSK 97.M8X180CSK REF: OS117 pg 2 of 10 26.07.2019... - Page 3 PARTS REQUIRED ROOF TRIM / KING ‘POST’ QTY x 1 - RT1 - ROOF CAP QTY x 1 - RT2 - KING POST QTY x 4 - RT3a - 6x1 TRIM QTY x 4 - RT3b - 6 x 1 TRIM ROOF ASSEMBLIES QTY x 8 - RA - ROOF ASSEMBLIES ROOF MAIN SUPPORTS...
-
Page 4: Foundation Details
FOUNDATION DETAILS NOTES: POST HOLES 400MM x 400MM ENTRANCE REF: OS117 pg 4 of 10 26.07.2019... - Page 5 FOUNDATION DETAILS REF: OS117 pg 5 of 10 26.07.2019...
-
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS INSTALL THE UMT TIMBERS ACCORDING TO GROUND PLAN ATTACH THE RS ROOF TIMBERS USING 2 X M8X80MM WOOD SCREW EITHER END, ENSURE TIMBERS ARE POSITIONED AS SHOWN NOTES: ENSURE TIMBERS ARE PRE-DRILLED AND COUNTERSUNK TIMBERS ARE POSITIONED LEVEL WITH THE TOP OF THE UPRIGHT TIMBER REF: OS117 pg 6 of 10... - Page 7 INSTALLATION INSTRUCTIONS ATTACH RM TIMBERS TO KING POST (RT2) AND SCREW TO UPRIGHTS USING 2 X M8X120MM & 2 X M8X180MM WOOD SCREWS NOTES: ENSURE SCREWS ARE AS SHOWN TO RIGHT, TAKE CARE NOT TO SPLIT UPRIGHT TIMBER 2X 120MM PER TIMBER 2X 180MM SCREWS PER END REPEAT FOR THE REMAINING RM TIMBERS USING 120MM SCREWS INTO THE KING POST AND 180 SCREWS INTO THE UPRIGHT TIMBERS...
- Page 8 INSTALLATION INSTRUCTIONS SCREW RA - ROOF ASSEMBLIES TO RM TIMBERS USING 6 X M8X80MM WOOD SCREWS PER SIDE, ENSURE ROOF IS POSITIONED AS SHOWN REPEAT FOR THE REMAINING RA - ROOF ASSEMBLIES REF: OS117 pg 8 of 10 26.07.2019...
- Page 9 INSTALLATION INSTRUCTIONS SCREW TRIM TIMBERS TO THE MAIN ROOF SUPPORTS (RM TIMBERS) USING 4 X M8X80MM WOOD SCREWS FOR EACH SECTION FIG 1 FIG 2 NOTES: RTA / B TIMBERS ARE TO BE POSITIONED ALTERNATELY TO ENSURE THE TIMBERS DO NOT CLASH - SEE ABOVE FIG 1 ENSURE OVERHANG IS AS SHOWN ABOVE - FIG 2 ATTACH THE RT1 - ROOF CAP USING 4 X M8X80MM WOOD SCREWS...
-
Page 10: Installation Complete
INSTALLATION INSTRUCTIONS ATTACH ROOF BRACES USING 4 X M8X80MM WOOD SCREWS (2 EITHER END) , ENSURE TIMBERS ARE PRE-DRILLED AND COUNTERSUNK RIGHT LEFT NOTES: COMPOUND CUT FACE IS POSITIONED AGAINST THE UPRIGHT TIMBER INSTALLATION COMPLETE PLEASE CHECK ALL SCREWS COUNTERSUNK / NEAT SAND ANY TIMBERS AS REQUIRED REF: OS117 pg 10 of 10 26.07.2019...
Need help?
Do you have a question about the OCTAVIA OS117 and is the answer not in the manual?
Questions and answers