Operation And Controls; Before First Use - Princess 519000 User Instructions

General
This Princess Cordless Hair Straightener
can straighten curled hair, but it can also
give extra looks to straight hair by creating
hair locks and waves.
The appliance is equipped with two heating
plates that are covered with ceramic,
tourmaline and a nano silver coating. The
ceramic material gives your hair a nice
shiny look while the tourmaline makes your
hair anti-static resulting in easy pliable hair.
The nano silver coating has a cleansing
effect on your hair. Regular use of this
appliance will keep your hair soft, shiny,
pliable and healthy.
The appliance is powered by four
rechargeable batteries. This makes the
appliance easy to use without inconvenient
power leads.
The temperature is easily adjustable from
80 °C until maximum 200 °C.
Operation and
controls
See Figure 1.
The appliance is equipped with the
following features:
1 Lock button
2 Heating plates (2x)
3 Button to increase the temperature
adjustment
4 Button to decrease the temperature
adjustment
5 On/off button
6 Digital display
7 Recharge connection
8 Mirrors with protective film (2x)
9 Adaptor
10 Storage bag
6 Article 519000 Cordless Hair Straightener

Before first use

1 Take the appliance out of the packaging
and remove all packaging materials.
2 Remove the protective film from the
mirrors.
3 Clean the appliance (see 'Maintenance
and cleaning').
4 The appliance is shipped with an
opened battery compartment and
separately packed rechargeable
batteries.
Make sure you position the batteries as
indicated on the appliance (see
figure 3).
5 Close the battery compartment.
6 Recharge the batteries completely (see
'Recharging batteries').
Use
1 Close the appliance and lock it in that
position by shifting the lock button to
the locked position.
Keep the appliance in the closed
position during heating up to avoid
unnecessary heat losses.
2 Press for about one second on the on/
off button to switch on the appliance.
A short beep will be heard and the
display will show the present
temperature of the heating plates.
Normally you will see an increasing
temperature of the heating plates.
The default temperature setting is
180 °C.
3 Adjust the set temperature.
When one of the temperature
adjustment buttons is pushed, the
display will shortly show the set
temperature.
Adjust the set temperature with the
temperature adjustment buttons.
Holding a temperature adjustment
button depressed will result in a rapidly
increasing/decreasing set temperature.
Press the temperature adjustment
buttons shortly to increase/decrease
the set temperature in steps of 1 °C.
When the set temperature is set, after
about 1 second the present