Table of Contents
Advertisement
ASSEMBLY STEPS
Fig. 1
Lift the handle to level
position as Fig. 1
Remove the screws and Plastic piece as Fig. 4. Take out the xed steel piece from instruction
PE bag, then going the screws through the holes and keep the "up" toward front as Fig. 5.
4
www.PyleUSA.com
Move the slide lock downside and lock
to upper bracket as Fig. 2
Fig. 4
Fig. 2
Press the button on the wheel holder
to assemble the rear wheel as Fig. 3.
M6*20mm
UP
M6*22mm
Fig. 5
Plastic piece
Button
Fig. 3
Fig. 6
Completely unfolding
and assembly as Fig. 6.
Advertisement
Table of Contents
