Advertisement
www.PyleUSA.com
Before Assembly
Check all springs BEFORE assembly. If any spring is not attached or damaged, pls follow
below processes to attach or replace the spring.
A. Find the open end of the SPRING (#3) and hook this end into the hole on the Rail.
B. Swing the SPRING (#3) to face inside of the trampoline.
C. Attach the metal loop on the MAT (#2) to the spring hook.
Assembly Instruction
WARNING
1. Keep children away from the trampoline during assembly.
2. Keep ngers away from the ends of the rails in the hinge area when unfolding the trampoline.
The RAILS will try to spring back to the folded position if they are released before the snap into place.
Serious injury can occur if ngers are caught between the ends of the RAILS.
3. Assembly and disassembly must be carried out by two people to minimise the risk of injury.
2
STEP 1
Lay the folding trampoline on the oor in its still folded position. Push out the ends so the trampoline
forms a semi-circle.
4
Advertisement
