Table of Contents
Advertisement
Quick Links
Wi-Fi GATEWAY Model IoTW
ATTENTION
Read carefully these instructions before installing and using this device and keep them for future reference. Attention to installation and electrical wiring. Use this
device only as described in this document and never use itself as a security device. Ιf the internet connection is lost, data logging pauses. The device must be
disposed of in accordance with local standards for the collection of electrical and electronic
CONTENTS
1.
Description and models
2.
Technical specifications
3.
Connections
4.
LED indications, Wi-Fi signal and symbol description on Cortex platform
5.
6.
Connect IoTW gateway to Wi-Fi – Provisioning
7.
8.
9.
10.
11.
12.
13. Connect a temperature sensor NTC or a humidity/temperature sensor SHT31-DIS
14.
15.
16.
Alternative way of registering a Wi-Fi- network
DESCRIPTION AND MODELS
ΙοΤW is a Modbus to Wi-Fi gateway which connects a compatible device or a temperature/humidity sensor to the cloud IoT and the Cortex platform. Communication is
established through the serial input of the device and via internet. User can access the platform either via mobile application or via a browser to any pc. Cortex platform can
fully monitor and control many devices, send email and notifications to mobile, in case of an alarm. Connection to the local router is established via Wi-Fi protocol. IoTW
gateway can connect to only one device through a supplied 5 pole cable; it has a control button and an indication LED. IoTW gateway is powered either with an external power
supply +5Vdc or directly from the device via the serial input. Compatible to EN12830.
Models
ΙοΤW can monitor a NTC 10K temperature sensor and a device at the same time
IoTWH can monitor a humidity/temperature sensor SHT31-DIS and a device at the same time
For further information please contact us via
TECHINICAL SPECIFICATIONS
Power supply: +5Vdc (not included) / Minimum current operation: 1.5A
It is recommended using a power supply safety fuse: 1.5Α (not included)
Temperature sensor NTC 10K with accuracy 1% 25
Humidity and temperature sensor SHT31-DIS from 0-100%RH and from -40-125°C with metal tube Φ16mm and length 63mm (not included)
Humidity accuracy (SHT31-DIS) from 0-100%RH ±2%RH
Temperature accuracy (SHT31-DIS) from -40-125°C ±0.4°C
Cable 5 poles 0.5m length for connecting Wi-Fi gateway to the serial input of the device
Button / LED indication
Connections with plug-in terminal blocks
Operating temperature: -15÷+55°C / Storage temperature: -20÷+80°C
The device is mounted on Ω rail and it is restrained with one plastic bracket
Dimensions 20x59x78mm / IP20 Protection
EN12830 compatibility: Accuracy class: Class 1 / Software class: II / Suitability for storage (S) / Measuring range -30 to +30
CONNECTIONS
ATTENTION: according to safety standards, the device must be properly positioned and protected from any contact with electrical parts. The device must be fastened in such a way that it cannot
be removed without the use of tools. Disconnect the main safety switch of the installation before proceeding to any maintenance. Disconnect the power supply of the device before proceeding to
any maintenance. Do not place the device near heat sources, equipment containing strong magnets, in areas affected by direct sunlight or rain. Prevent electrostatic discharges and sharp objects
from been inserted to the device. Separate signal cables from power supply cables to prevent electromagnetic disorders. Signal cables must never be in the same pipe with the power supply cables.
Connect the humidity/temperature sensor or/and the 5 pole
connect also the external power supply +5Vdc to the gateway. Power up your device.
support@kiour.com
mentioning your Gateway name displayed on its label.
o
C temperature range -50÷+112°C (-58÷+230°F) IP68 (not included)
/
It is recommended using a torque wrench with maximum torque 0.4Nm
calbe, which you will find connected on the serial input of the gateway, to the serial input of the device. If necessary,
equipment.
o
C
1
Advertisement
Table of Contents
Related Manuals for KIOUR IoTW
Summary of Contents for KIOUR IoTW
- Page 1 Connection to the local router is established via Wi-Fi protocol. IoTW gateway can connect to only one device through a supplied 5 pole cable; it has a control button and an indication LED. IoTW gateway is powered either with an external power supply +5Vdc or directly from the device via the serial input.
- Page 2 4. Once you are in, no device is listed yet to the main dashboard and it is displayed No data to display. CONNECT IoTW GATEWAY TO Wi-Fi – PROVISIONING 1. Connect the serial input of the device to the gateway via the supplied 5-pole cable. Power up the device and the gateway. Gateway’s LED starts blinking 2 times/second, which indicates that the gateway is waiting to connect to the local Wi-Fi.
- Page 3 Screenshot from PC Having successfully registered the Wi-Fi network to the IoTW gateway, you are back to the main dashboard. Automatically the connected device must appear on the dashboard. If not, toggle the power supply of both device and gateway and wait for the device to appear automatically. By pressing on the device, you enter to the device dashboard where you have full control and data logging on progress.
- Page 4 CONNECT A TEMPERATURE SENSOR NTC OR A HUMIDITY/TEMPERATURE SENSOR The sensors connect to plug-in terminal blocks of the gateway. The gateway can monitor and control at the same time a KIOUR device and a temperature sensor NTC (gateway model IoTWN) or a humidity/temperature sensor SHT31-DIS (model IoTWH). Through Cortex platform you can adjust the parameters of NTC and SHT31-DIS for high/low...
- Page 5 Humidity accuracy from 0-100%RH ±2%RH Temperature accuracy from -40-125°C ±0.4°C Screenshot from PC REMOTE RESTART OF IOTW GATEWAY If you want to restart your gateway, follow these steps: 1. To the bottom of the main dashboard page, click on Setup my network.
- Page 6 The device is under two year’s guarantee. The guarantee is valid only if the manual instructions have been applied. The control and service of the device must be done by an authorized technician. The guarantee covers only the replacement or the service of the device. KIOUR PC implements a Quality Management System according to EN ISO 9001:2015 Standard with registration number 01013192.
Need help?
Do you have a question about the IoTW and is the answer not in the manual?
Questions and answers