Hisense RS818N4TCE User's Operation Manual page 200

Note!
Wi-Fi Function Introduction
This appliance may be controlled
remotely with a smart phone or a tablet
computer. If the appliance is not
connected to the home network, it will
function like a regular appliance.
What do you need to connect the
appliance?
Signal from the local wireless network
(Wi-Fi) should be sufficiently strong in
the spot where the appliance is
installed.
Home network router has to be
connected to the internet, and the Wi-Fi
function on the appliance should be
activated.
The smart phone/tablet computer has
to be connected to the internet.
Operating system on your smart
phone/tablet computer
compatible with the ConnectLife app.
APPLIANCE Wi-Fi STATE
There are three WiFi states as shown
below, you can activate the display
board according to the relevant steps.
CONNECT APPLIANCE TO Wi-Fi
After activating the Wi-Fi function,
connect your device to your home
router in order to connect your
appliance with the ConnectLife mobile
app.
should be