Advertisement
Available languages
Available languages
STEP 3
1. On the cutout floor, mark hole centers for the
anti-tip brackets as shown using the supplied
template. Be sure to align the center line of
template to center line of cutout floor.
2. Drill four holes for anti-tip brackets.
" drill or #35 drill)
(use 7/64
3. Install two anti-tip brackets onto cutout floor
"
using four 1/2
screws.
DIMENSIONS:
"
A = 5
13 /16
B = 3 "
"
C = 12
7 /8
STEP 4
1. Slide microwave oven part way into cabinet
opening.
(Bottom brackets must be flat to the cutout
floor to engage correctly with anti-tip brackets
as shown)
2. Plug in the microwave oven.
3. Center the microwave oven within the
cut-out opening and slide the microwave oven
in place, engaging the anti-tip brackets.
(Ensure the microwave oven is accurately
centered)
4. Drill pilot holes (use 7/64
through the positioning flange and then install
"
three 1/2
screws at the front of the bottom
duct as shown.
"
drill or #35 drill)
A
A
B
Cutout Floor
1 /2" Screws (2)
Anti-Tip Bracket
Bottom Duct
Anti-Tip
Bracket
1 /2" Screw
B
C
Center Line
1 /2" Screws (2)
Anti-Tip Bracket
Anti-Tip Assembly
1 /2" Screw
Bottom Bracket
Cutout
Opening
Positioning
Flange
Advertisement
