Table of Contents
Advertisement
Adding Pauses and Waits
Calls to automated systems often
require a password or account number.
Instead of manually entering numbers
each time, you can store the numbers in
a contact entry, along with special
characters called pauses.
• Add Wait: A hard pause stops the calling
sequence until further input from you.
• Add 2-Sec Pause: A two-second pause
stops the calling sequence for two seconds
and then automatically sends the remaining
digits.
To enter a Pause or Wait into a number
in a contact field:
1. Enter the number up to the point
where a pause or wait is needed.
2. Press the Right Soft Key
then select:
•Add 2-Sec Pause: Insert a 2-second
pause, indicated by a "P" in the display.
Enter the remaining numbers after the
"P".
•Add Wait: Insert a hard pause, indicated
by a "W" in the display.
Note: Entering multiple 2-sec Pauses
extends the length of a pause. For
example, two consecutive 2-sec
Pauses cause a total pause time of
four seconds. Pauses count as
digits towards the 48-digit
maximum.
Understanding Your Contacts
Options,
54
Advertisement
Table of Contents
