Page 1
IBEX ™ ANTENNA MOUNT ASSEMBLY ASSEMBLY VIDEO...
Page 2
Parts (1) M8 x 12 Bolt Antenna Mount (1) T-Nut 5mm Hex Key...
Page 3
Antenna Mount Installation Place (1) T-Nut in lower IBEX™ T-Nut channel. Install Antenna Mount into T-Nut using (1) M8 x 12 Bolt. Installation of the antenna into the mount may need to occur before Antenna Mount Installation, depending on desired location...
• Check tightness of all bolts and screws periodically. • Drive responsibly. If you have questions or problems, please contact Küat directly by calling toll free 1(877)822-KUAT, or by email: info@kuat.com ADVERTENCIAS • Siga las instrucciones para un montaje, instalación y uso adecuados.
Page 5
You can review our limited warranty on our website or call customer service at the number below if you have questions or need a repair, replacement, refund, or a copy of the limited warranty. www.kuat.com/warranty Questions or comments? Drop us an email or call us directly! kuat.com info@kuat.com...
Need help?
Do you have a question about the IBEX and is the answer not in the manual?
Questions and answers