Toshiba Satellite L640-BT2N13 Resource Manual page 23

(Sample Illustration) Positioning the disc in a slot-type drive
Removing an optical disc
To remove an optical disc with the computer turned on:
1 Press the eject button on the drive.
2 Remove the disc from the drive, as indicated below for your
drive type:
3 Place the disc in its protective cover.
Slot-type drive: With the label facing up, carefully place
the disc partially into the slot until the disc stops or the
drive starts pulling the disc in.
Use only standard (12 cm) CD or DVD Discs. Any other size or shape
disc cannot be removed from this slot and may damage the system.
If your optical disc drive has a manual eject button, you can remove a
disc while the computer is off if necessary (for example, if you
cannot turn on the computer because the battery is completely
discharged). See "Using the manual eject button" on page 24.
Otherwise, the computer must be powered on to eject a disc (follow
the procedure below).
Do not press the eject button while the drive in-use indicator light is
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray (on a
tray-type drive), wait for it to stop spinning before you remove it.
Tray-type drives: Pull the tray out fully, remove the disc,
and then gently press the tray in to close it.
Slot-type drives: Grasp the disc and remove it from the
slot.
Using the optical disc drive
23