Table of Contents
Advertisement
Quick Links
Assembled by
Installation date
Phone number elevator
Battery changed on date
Keep this manual on a save place, preferably in the logbook in the machineroom
The RUKRA GSM / PSTN interface replaces a standard PSTN landline and can be installed in
the engine room, the elevator shaft or on the roof of the cabin. Up to 5 RUKRA Elevator
Phones can be connected parallel to one RUKRA GSM / PSTN interface.
De The RUKRA GSM / PSTN interface is simlock free and equipped with an internal battery.
Comes with magnetic antenna, internal battery and a power adapter with 230VAC power
cord with molded plug and is ready for immediate use without programming.
No programming required, you only need an active SIM-card
Read this manual carefully before you start the installation or programming
:
:
:
:
WWW.RUKRA.COM
RUKRA GSM/PSTN Interface 4G_ENG_V1.2
Article number: RK-1240
:
Engineer
PIN
:
PUK:
Namw :
Advertisement
Table of Contents
Related Manuals for Rukra RK-1240
Summary of Contents for Rukra RK-1240
- Page 1 The RUKRA GSM / PSTN interface replaces a standard PSTN landline and can be installed in the engine room, the elevator shaft or on the roof of the cabin. Up to 5 RUKRA Elevator Phones can be connected parallel to one RUKRA GSM / PSTN interface.
- Page 2 Use the supplied magnets or screws to fix the GSM module (see image page 3 for placement of magnets). The RUKRA 4G GSM/PSTN interface is preferably placed in the machine room, but can also be mounted in the elevator shaft or on the roof of the elevator cabin.
- Page 3 Product handleiding RUKRA GSM/PSTN Interface_NL_V1.2 Artikelnummer: RK-1240 MEANING OF THE LED’S Mounting the magnets:...
- Page 4 : 55V / 50Hz Signaling : 425Hz ± 20% Caller ID : FSK / CLIP Cable length : Maximum 200meter (from the RUKRA GSM/PSTN interface to the elevatorphone) Programming : By SMS GSM Module Fabricated : Telit LE910C1-EU Mobile networ...
Need help?
Do you have a question about the RK-1240 and is the answer not in the manual?
Questions and answers