Inserting And Removing A Cd - Motorola ML 900 HK1223 Owner's Manual

All manuals and user guides at all-guides.com
Inserting and Removing a Disc
Follow this procedure to insert or remove a disc.
1. Turn on the computer.
2. Press the eject button and the DVD tray will slide out partially.
Gently pull on it until it is fully extended.
3. To insert a disc, place down the disc in the tray with its label facing
up. Slightly press the center of the tray until it clicks into place.
To remove a disc, hold the disc by its outer edge and lift it up from
the tray.
4. Gently push the tray back into the drive.
NOTE: In the unlikely event that you are unable to release the DVD tray by pressing the
eject button, you can manually release the DVD. (See "DVD/Combo/DVD Dual Drive
Problems" in Chapter 8.)
2-16
Eject button In-use
indicator
Operating Your Computer