Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for UNELL SN-SMWR02A
Summary of Contents for UNELL SN-SMWR02A
- Page 1 Millimeter Wave Radar User Manual...
- Page 2 Millimeter Wave Radar Thank you for purchasing our product. This user manual is a reference for using our radar product. Please read the following safeguards and warnings carefully before using this series product and keep this user manual well for future reference. Electrical Safety ●...
-
Page 3: Table Of Contents
Millimeter Wave Radar Millimeter Wave Radar Content ● iation or lighting. ● Pack the device with standard factory packaging or the equivalent mate ● rial during the shipment. Safeguards 1. Open-Package Inspection ● Make sure the antenna surface of radar is clean without any dirt. 2. -
Page 4: Open-Package Inspection
Millimeter Wave Radar Millimeter Wave Radar Open -Package Inspection No. Cable Port Port Name Function Description Signal line Optocouple output: 2 sets of switch quantities, line definition as Please check if there is any obvious damage to the device appearance and confirm if the Switch output(dry cont- below:Grey-black=Alarm out1_M;... -
Page 5: Dimension
Millimeter Wave Radar Millimeter Wave Radar 2.3 Radar Installation Direction 2.2 Dimension The installation direction of radar is crucial to measurement accuracy Please make sure the installation direction is correct. The lateral view of the radar installa- Note： ● The following dimension figures are for reference only. Unit: mm. Fig2-2 is for tion is shown in Figure 2-4. -
Page 6: Bootup Description
Millimeter Wave Radar Millimeter Wave Radar ⑤ If the radar installation environment is for water object detection, radar install at ③ If the radar installation environment is for fence perimeter protection, and to bridge to monitoring ships on the surface of water, like figure 2-9. monitoring the fence outside targets against intrusion.like figure 2-7. -
Page 7: Device Connection
Millimeter Wave Radar Millimeter Wave Radar ② Connect PC and SMWR02A/SMWR03A radar sensor as shown in figure3-2: Network Port Waterproof Connector Network Cable Fixing Rubber Ring Rubber Ring RJ45 Connector Waterproof Fastening Cover Fig.3-1 ① Keep the convex groove outward and install the rubber ring into the network port with the smaller hole outward and install the fixing rubber ring into the main body ②... -
Page 8: Strobe Siren Connection
Millimeter Wave Radar Millimeter Wave Radar 3.5 Strobe Siren Strobe Siren Connection Please refer to siren operation manual. Strobe siren signal wires are to connect to radar alarm signal output, as the diagram 3-4: Note： FAQ & Solutions ● Radar alarm output is I/O relay type, please choose the right model & type strobe Table 4-1 siren. -
Page 9: Maintenance Service
Millimeter Wave Radar Maintenance Service Dear Customer : Thank you for using this product. To guarantee you perfect enjoying after-sales service support, please read the warranty certificate careful- ly after purchase. Users enjoy free maintenance within the warranty time and mainte- nance services with discount out of warranty period under proof of this warranty certificate.
Need help?
Do you have a question about the SN-SMWR02A and is the answer not in the manual?
Questions and answers