Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for UNELL SMWR21A-P
Summary of Contents for UNELL SMWR21A-P
- Page 1 Millimeter Wave Radar User Manual ● ●...
- Page 2 Millimeter Wave Radar Thank you for purchasing our product. This user manual is a reference for using our radar product. Please read the following safeguards and warnings carefully before using this series product and keep this user manual well for future reference. Electrical Safety ●...
-
Page 3: Table Of Contents
Millimeter Wave Radar Millimeter Wave Radar ● iation or lighting. Content ● Pack the device with standard factory packaging or the equivalent mate ● rial during the shipment. Safeguards 1. Open-Package Inspection ● Make sure the antenna surface of radar is clean without any dirt. 2. -
Page 4: Open-Package Inspection
Millimeter Wave Radar Millimeter Wave Radar Open -Package Inspection No. Cable Port Port Name Function Description Signal line Optocouple output: 2 sets of switch quantities, line definition as Please check if there is any obvious damage to the device appearance and confirm if the Switch output(dry cont- below:Grey-black=Alarm out1_M;... -
Page 5: Dimension
① Radar is installed in front of the detection area and aligns with the center of alert Note： area, as shown in Fig. 2-4. ● The following dimension figures are for reference only. Unit: mm. Fig2-2 is for SMWR21A-P Radar Alert Area Radar Detection Area Radar Fig.2-4 ②... - Page 6 Millimeter Wave Radar Millimeter Wave Radar ③ Scene 1: Scene of the perimeter of the channel.like figure 2-7. Theoretical blind zone calculation formula： ● Radar installation in the tested area ahead, radar normal alignment warning area center. 频谱探测装置 Bracket Radar normal Radar normal Antenna Radar...
-
Page 7: Bootup Description
After pulling the network cable without crystal head through main body of water- After power on, SMWR21A-P will generate sounds like“di” for two times and proof connector, fixing rubber ring and fastening waterproof cover, make the “didi”... -
Page 8: Strobe Siren Connection
Millimeter Wave Radar Millimeter Wave Radar ③ Start Test 3.5 Strobe Siren Please correctly connect SMWR21A-P network cable with PC, and connect Please refer to siren operation manual. 12V DC, then bootup Tools Management System User Manual IP configuration details(Help). -
Page 9: Maintenance Service
Millimeter Wave Radar Maintenance Service Dear Customer : Thank you for using this product. To guarantee you perfect enjoying after-sales service support, please read the warranty certificate careful- ly after purchase. Users enjoy free maintenance within the warranty time and mainte- nance services with discount out of warranty period under proof of this warranty certificate.