CALEFFI DIRTMAG PRO 5463AM Series Installation, Commissioning And Servicing Instructions

DIRTMAG
®
© Copyright 2021 Caleffi
Installation, commissioning and servicing instructions
Divisione Tecnica
COMUNICAZIONE TECNICA
"DIRTMAGPRO"
This item is designed for use in closed hydronic systems. Do not use this item in plumbing applications. It does
not meet the low-lead plumbing standards of U.S. and Canada.
Product range
5463AM Series DIRTMAG PRO dirt separator with dual magnets with NPT female threaded, sweat, and
CBN5462 Series Insulation shells for DIRTMAG PRO Series 5463AM, sizes 1" - 2".
Dry Well with
magnet stack
External
magnet collar
PRO dirt separator with dual magnets
www.caleffi.com
Function
In heating and air conditioning control systems, the
circulation of water containing impurities may result in
rapid wear and damage to components such as pumps
and control valves. It also causes blockages in the heat
exchangers, heating elements and pipes, resulting in
a lower thermal efficiency within the system. The dirt
separator removes these dirt particles from the fluid,
collecting them in a large collection chamber, from
which they can be drained even while the system is in
operation. This device is capable of efficiently removing
even the smallest particles, with extremely limited head
loss.
®
The DIRTMAG PRO dirt separator with dual magnets
Doc. DT-002 rev.3
extends the Caleffi dirt separator family by adding a
powerful neodymium magnetic stack inside a drywell
inserted into the top of the body within the flow stream.
Additional magnetic flux increases the speed of
magnetite (ferrous impurities) removal from the hydronic
fluid for maximum protection.
Insulation shells are available separately.
Magnet stack
pull out knob
Internal dirt collec-
tion element
Drain valve
1
H0009576
5463AM Series
press connections sizes 1"- 2"