BMW SEDAN 5 Series Owner's Manual page 22

QUICK REFERENCE
Button Function
Changeover of waveband/satel‐
lite radio.
Changing the waveband.
Menu Apps.
Navigation destination input
Entering a destination via the search
1. Press the button on the Controller.
2. "Where to?"
3. Enter at least two letters or characters.
Select point of interest categories from the
points of interest menu as needed.
The search term may be completed automat‐
ically in orange lettering.
Move the Controller up to accept the sug‐
gested search term.
4. Select the icon, if needed.
A list of the results is displayed.
5. If necessary, "Filter"
6. "Show results"
7. Select the desired entry.
8. If necessary, "Start guidance"
Using the mobile phone
General information
After the mobile phone is connected once to the
vehicle, the mobile phone can be operated using
iDrive and the steering wheel buttons.
Connecting via Bluetooth®
1. "COM"
2. "Mobile devices"
3. Tilt the Controller to the right.
4. "New device"
22
Set-up and use
Online Edition for Part no. 01405A48957 - X/21
5. "Phone calls and audio"
The vehicle's Bluetooth name is displayed on
the Control Display.
6. Compare the control number displayed on
the Control Display with the control number
on the display of the mobile device, and con‐
firm that the two match.
7. A Bluetooth connection is established.
The mobile device is connected to the vehicle
and displayed in the device list.
Accepting a call
Depending on the equipment, incoming calls can
be answered in several ways.
▷ Via iDrive:
"Accept"
▷ /
Press the corresponding button on the steer‐
ing wheel.
▷ Use the thumbwheel on the steering wheel to
select from the list in the instrument cluster:
"Accept"
▷ Via touchscreen: tap on the corresponding
entry on the Control Display.
Dialing a number
1. "COM"
2. If necessary, "Telephone"
3. "Dial number:"
4. Enter the numbers.
5. Select the icon. The connection is estab‐
lished via the mobile phone to which this
function has been assigned.
Establish the connection via the additional tele‐
phone:
1. Press the button.
2. "Call via"