Introduction; Intended Use; Indications For Use; Modes Of Operation - SPAN PressureGuard APM Owner's Manual

INTRODUCTION TO PRESSUREGUARD
DESCRIPTION: The system consists of a foam shell with a high-density foam topper serving
as the support surface underneath the patient. The foam shell also includes contoured foam
bolsters at the sides and ends of the mattress, providing added patient stability and positioning.
The system also includes the unique Heel Slope
the sensitive heel area. Within the foam shell is housed the inflation system, consisting of air
cylinders which run lengthwise within the mattress. The air Control Unit connects to the
mattress at the patient foot-end.
The system has been tested and successfully approved to the following standards:
FOR US AND CANADA ONLY
INTENDED USE: A powered, alternating pressure management system used for the prevention
and treatment of pressure injuries.
INDICATIONS FOR USE: The PressureGuard
powered, flotation therapy mattresses providing a pressure redistribution surface for the
prevention and treatment of pressure injuries.
MODES OF OPERATION: The PressureGuard
minute cycles.
WARNING - To reduce the risk of electrocution
READ ALL INSTRUCTIONS BEFORE USING THIS UNIT.
1. Always unplug this unit immediately after using.
2. Do not operate near water.
3. Do not place or store product where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. Do not reach for a product that has fallen into water. Unplug immediately.
6. Use this unit only for its intended use as described in the operating instructions.
7. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water. Contact Span-America Medical
Systems, Inc., for return of Control Unit for examination and repair.
8. Keep the cord away from heated surfaces.
Alternating Pressure Mattresses
Certified for Medical Equipment-Air Pump with respect to electrical
shock, fire and mechanical hazards only in accordance with
UL60601-1 AND CAN/CSA C22.2 NO.601.1
Le produit à été testé avec des équipements médicaux et
respecte les normes UL 60601-1 & CAN/CSA C22.2 No.601.1.
prévenant les choc électrique, le feu et les risques de blessures
physiques.
™ feature, designed to further reduce pressure for
®
APM (Alternating Pressure Mattress) is a
®
APM provides alternating pressure in 10-
3
APM
®
P10773 R2 CO# 2619