National Instruments 8260 User Manual
National Instruments 8260 User Manual

National Instruments 8260 User Manual

Sata hard drive removal and replacement procedure for 4-drive storage module

Advertisement

NI-8260

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8260 and is the answer not in the manual?

Questions and answers

Summary of Contents for National Instruments 8260

  • Page 1 NI-8260...
  • Page 2 Avoid mounting the hard drive near strong magnetic sources such as loud speakers. Ensure that the hard drive is not affected by external magnetic fields. Protect the hard drive and NI 8260 from hard contact with other objects. Impacts may damage the equipment.
  • Page 3 Figure 1. Figure 1. Hard Drive Screws Hold the module firmly in place as you remove the four screws from the drive to be replaced. SATA Hard Drive Procedure for NI 8260 Storage Module ni.com...
  • Page 4 Pull the drive straight out from the module as indicated by the arrow in Figure 2. Figure 2. Removing a Hard Drive © National Instruments Corporation SATA Hard Drive Procedure for NI 8260 Storage Module...
  • Page 5 For more information on these tools, refer to ni.com/support National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Table of Contents