Download Print this page

Wahoo KICKR MOVE Quick Start Manual And Instructions page 6

Smart bike trainer

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
FOR 130MM OR 135MM QUICK RELEASE
Adapters Needed: A and B
KICKR MOVE comes pre-configured out of the box for bicycles with 130mm quick release spacing. If you have a bicycle
with 130mm spacing proceed to "Attaching your Bicycle". For 135mm spacing, remove quick release skewer, reverse
Adapter B and reinstall quick release skewer.
FOR 142MM OR 148MM THRU AXLE
Adapters Needed: C and D or E
To be used with the 12mm thru
axle supplied with bicycle.
ATTACHING YOUR BICYCLE
Prior to attaching your bicycle, ensure the lock lever is securely
locked to avoid risk of injury.
Shift your bicycle chain into the smallest sprocket in the front and rear, then remove your rear
wheel. Install your bicycle on the KICKR MOVE by aligning the chain with the smallest sprocket
on the KICKR MOVE and pressing down to fully seat the dropouts on the KICKR MOVE's axle.
For bicycles with quick release - Secure your bicycle by tightening
the quick release acorn nut and clamping the quick release lever
shut. The quick release lever is "open" when it curves away from the
bicycle frame (1); the lever is "closed" when it curves towards the
bicycle frame (2). The handle of the quick release skewer is always
on the non-drive (non cassette) side of the KICKR MOVE. Only use the
provided quick release skewer while using the KICKR MOVE.
For bicycles with thru axle - Secure your bicycle by reinstalling
your bicycle's thru axle (3) and tightening to manufacturer
specifications (4).
Failure to properly tighten the quick release skewer or thru axle may result in property damage, including
damage to the attached bicycle, or personal injury. If you are unsure of the proper tension, please consult your local bike
shop or contact Wahoo Fitness for assistance.
Do NOT ride the KICKR MOVE until the quick release skewer or thru axle is properly tightened.
PROTIP: Lift the front wheel up while pressing down on the saddle to ensure
P
the bicycle is fully seated on the trainer.
Adapter A
Adapter C
130mm Configuration (Adapter B)
135mm Configuration (Adapter B)
12x142mm Configuration
(Adapter D)
12x148mm Configuration
(Adapter E)
(3)
(1)
(2)
(4)
SCALE 0.500
SCALE 0.500

Advertisement

loading