Maintenance Maintenance; Maintenance; Wiping The Dirt - Omron HV-F311 Instruction Manual

Maintenance

Maintenance
To protect your device from damage, follow
the directions below:
Changes or modifications not approved by
the manufacturer will void the user warranty.

Wiping the Dirt

Note: You cannot wipe or wash the gels.
• Wiping the cord with pads
1. Remove the gel and discard before wiping
the pad.
2. When the pad has become dirty or soiled,
wipe the surface with a soft cloth slightly
moistened with water or a mild (neutral)
detergent.
3. Do not wash the cord and pads with
running water.
4. Let air dry before placing new gels onto
the pads, do not use old gels.
• Wiping the device
1. Turn the device off and disconnect the
cord with pads from the device.
2. Wipe with a cloth lightly moistened or
soaked in a mild (neutral) detergent and
wipe gently.
• Do not use chemicals (such as thinner,
benzene).
• Do not let water get into the internal
area.
• When should you replace the gels?
If the gel no longer sticks firmly to your skin
or if more than 25 % of the gel's surface is
not in contact with your skin.
Gels are replaceable and can be purchased.
Note: Refer to page 11.
27