Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Intelbras Smart TX 4020
Summary of Contents for Intelbras Smart TX 4020
- Page 1 English User manual TX 4020 Smart...
- Page 2 With digital and SMD assembly technology, it is compatible with all Intelbras wired sensors and the majority of wired sensors available on the market. Works in FSK or OOK...
- Page 3 Care and safety » LGPD – Data processing by Intelbras: Intelbras does not access, transfer, capture or carry out any type of processing of personal data using this product. » This product is intended for indoor and semi-open environments. » Avoid installing the transmitter directly under metal surfaces to avoid changes in its operating characteristics.
-
Page 4: Table Of Contents
Summary 1. Technical specifications 2. Features 3. Product 4. Sensor opening 5. Registering the TX 4020 Smart transmitter 6. TX 4020 Smart transmitter supervision adjustment 7. Installation 7.1. Connection between TX 4020 Smart and wired sensor ..........9 7.2. -
Page 5: Technical Specifications
1. Technical specifications Operating voltage 3 V Lithium battery, model CR2032 RF Range 100 meters without barrier Transmission frequency 433.92 MHz Modulation Supervised (FSK) or unsupervised (OOK) OOK baud rate 2 KBps (open source) Anti jamming Against external interference Installation environment Internal and semi-open Operating Temperature -10°C to 50°C... -
Page 6: Product
3. Product Transmitter cover Battery contact Light conductor (LED) Registration button Base Jumper (OOK/FSK) Screw hole for fixing Cable connector 4. Sensor opening To access the TX 4020 Smart board for registration and battery replacement, simply push the hole and remove the cover. This way the plate will be exposed and ready for handling. -
Page 7: Registering The Tx 4020 Smart Transmitter
» Low battery sensor: the TX 4020 Smart has a battery level meter, which measures the voltage and notifies you of the best time to change it. If the alarm center is Intelbras, the sensor low battery warning will be indicated on the product panel. -
Page 8: Installation
7. Installation The TX 4020 Smart transmitter can be fixed using double-sided tape or a screw. If the option with double-sided tape is chosen, clean the surface that will be in direct contact with the tape and then stick it to the base of the product. If you are going to use screws, simply open the transmitter and use the holes for the screw located on the base of the product, as shown in the following figure. -
Page 9: Connection Between Tx 4020 Smart And Wired Sensor
7.1. Connection between TX 4020 Smart and wired sensor Use an external source to power the wired sensor, then connect the alarm output cable (normally closed (NC)) of the wired sensor to the TX 4020 Smart universal transmitter terminal, as shown in the following figure: TX 4020 SMART TX 4020 Smart SENSOR COM FIO... -
Page 10: Battery
Intelbras or directly disposed of in an environmentally appropriate manner, avoiding environmental and health impacts. If you prefer, the battery as well as other unused Intelbras brand electronics can be disposed of at any Green Eletron collection point (electronic waste manager to which we are associated). In case of doubt about the reverse logistics process, please contact us at (48) 2106-0006 or 0800 704 2767 (from Monday to Friday from 8 am to 8 pm and on Saturdays from 8 am to 6 pm) or by e-mail. -
Page 11: Warranty Term
8. After its useful life, the product must be delivered to an authorized Intelbras service center or directly disposed of in an environmentally appropriate manner to avoid environmental and health impacts. If you prefer, the battery, as well as other unused Intelbras brand electronics, can be disposed of at any Green Eletron collection point (waste management facility to which we are associated). - Page 12 Support via e-mail: suporte@intelbras.com.br Customer Service: 0800 7042767 Where to buy? Who installs it? 0800 7245115 Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia BR 459, km 124, 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG – 37540-000 01.23 CNPJ 82.901.000/0016-03 –...
Need help?
Do you have a question about the Smart TX 4020 and is the answer not in the manual?
Questions and answers