Advertisement
Quick Links
Advertisement
Related Manuals for Real-El RESERVE-500
Summary of Contents for Real-El RESERVE-500
- Page 1 OPERATION MANUAL UPS FOR EXTERNAL BATTERIES RESERVE-500 RESERVE-1000...
-
Page 2: Table Of Contents
Operation Manual RESERVE-500\ 1000 Congratulations on your purchase of the REAL-EL products! Please read this Operation Manual before using the unit and retain this Operation Manual in a safe place for future reference. COPYRIGHT © 2023. ENEL GROUP OU. This manual and information contained in it are copyrighted. All rights reserved. -
Page 3: Safety Measures And Precautions
• Do not allow liquid to get inside the device, it can cause a short circuit and electric shock. In the event of signs of incorrect operation (sparks, smells, etc.), immediately disconnect the device from... -
Page 4: Package Contents
• When using a battery of two or more units, they must be of the same type and capacity (if the batteries have different capacities, they will have different internal resistance, as a result of which the charge level will be different). Table 1. Selection of batteries for the RESERVE-500 Battery Load 100 W... - Page 5 UPS for external batteries RESERVE-500\ 1000 • When using multiple batteries, connect the batteries in parallel. To connect additional batteries, purchase additional cables separately. When connecting two or more batteries, the positive terminal of one battery is connected to the positive terminal of the other, the negative terminals are connected in the same way.
-
Page 6: Connection And Operation
Operation Manual RESERVE-500\ 1000 5. CONNECTION AND OPERATION • Install the set (UPS + batteries) in a place with sufficient ventilation (free space around the UPS should be at least 25 cm). • Connect the battery (purchased separately) to the UPS using the cables in the UPS, observing the polarity. - Page 7 UPS for external batteries RESERVE-500\ 1000 • Connect the UPS to a single-phase mains using the power cord. It is not necessary to turn on the UPS by button, after connecting to the mains - "autostart" function will start it automatically.
-
Page 8: Troubleshooting
Operation Manual RESERVE-500\ 1000 6. TROUBLESHOOTING Problem Cause Solution The UPS is connected 1. The button is not pressed. 1. Press button to the mains, but the 2. Switch off the load. Press the fuse 2. Input fuse has come into indicator does not button. -
Page 9: Technical Specifications
7.9 kg Notes: • Specifications given in this table are supplemental information and cannot give occasion to claims. • Technical specifications and package contents are subject to change without notice due to the improvement of TM REAL-EL production. Technical support: www.real-el.com... - Page 10 STAB WM-500, STAB WM-10000 Models: Manufacturer: ENEL GROUP OU, Katusepapi tn 6, Lasnamäe linnaosa, Tallinn, Harju maakond, 11412, Estonia. Made in China. ® Registered Trademark of ENEL GROUP OU. Estonia.