When using a battery of two or more units, they must be of the same type and capacity (if the batteries have different capacities, they will have different internal resistance, as a result of which the charge level will be different). Table 1. Selection of batteries for the RESERVE-500 Battery Load 200 W...
Page 5
UPS for external batteries RESERVE-500\ 1000 When using multiple batteries, connect the batteries in parallel. To connect additional batteries, purchase additional cables separately. When connecting two or more batteries, the positive terminal of one battery is connected to the positive terminal of the other, the negative terminals are connected in the same way.
Operation Manual RESERVE-500\ 1000 5. CONNECTION AND OPERATION the polarity. WARNING!!! When connecting battery to the UPS, sparking is possible when touching the power terminals. without load. Technical support: www.real-el.com...
Page 7
UPS for external batteries RESERVE-500\ 1000 Batteries need to be charged. Notes: consumers, and then turn off the UPS in the order described above. To turn on the UPS again, press and hold the button. If the UPS is not used for a long time, the battery should be charged every three months.
Operation Manual RESERVE-500\ 1000 6. TROUBLESHOOTING Problem Cause Solution is not pressed. to the mains 2. Input fuse has come into indicator does not action. light. 3. Unreliably connected cables. 3. Check cable connections to batteries. operates in the protects the equipment against surges in input voltage and has voltage disorders of the mains.
UPS for external batteries RESERVE-500\ 1000 7. TECHNICAL SPECIFICATIONS Model Output rated power Active power 300 W Input voltage Output voltage ~230 Output voltage form Pure sine wave Pure sine wave Mode of operation <4 msec <4 msec Charging current...
Page 10
STAB WM-500, STAB WM-10000 Models Made in China. ® Registered Trademark of ENEL GROUP OU. Estonia.