Table of Contents
Advertisement
How do I know if there is a problem?
Your cooktop will beep and a fault code will show in the display. You can mute the alert.
What to do
Try to fix the issue and clear the alert according to the onscreen instructions.
'E' fault codes
You may be able to clear the fault by resetting the cooktop. Follow the steps below:
1 Press and hold the power button to turn the cooktop off.
2 Wait a few seconds, then press and hold the power button again to turn the cooktop
back on.
If the fault code has disappeared, you can continue to use your cooktop. If not, turn the
power supply off and on at the wall.
If the problem persists
1 Note down the fault code.
2 Contact Customer Care or a Fisher & Paykel trained and supported service technician.
Refer to the Service and Warranty booklet for contact details.
FAULT CODES
23
Advertisement
Table of Contents
