Service- Und Sonderfunktionen - Grundig Xephia 42 PW 110-5510 TOP Service Manual

GRUNDIG Service

Service- und Sonderfunktionen

Tastenfunktionen TP160C (TP L6B)
i (MENU) - Aufrufen des Service Menü
- Menü-Punkt aktivieren
- Untermenü verlassen
P+ (Q) / P- (R) - Menü-Zeile (Menüpunkt) wählen
( O ) / ( P ) - Untermenü auswählen
- Wert ändern
Service-Mode aktivieren
– Taste "i" ("MENU") auf der Fernbedienung drük-
ken. Menü "bild" wird eingeblendet.
– Service Nummer "8500" ("9301") eingeben.
Service-Mode beenden
– Taste "i" ("MENU") auf der Fernbedienung drük-
ken.
Software-Versionsnummer
Im Service Menü "version" wird die Versionsnum-
mer angezeigt.
Service Menus
display
off
factory mode
panel 1280x768
xx:xx:xx
power on time
xx:xx:xx
back light time
25
scart prescale
45
nicam prescale
24
fm/am prescale
16
agc adjust
128
red brightness
128
red contrast
128
green brightness
128
green contrast
128
blue brightness
128
blue contrast
calibre
video format automatisch/auto
color space RGB
test pattern keine/none
color components all
solid field level 33
initial ats aus /off
factory reset press <ok> to reset
dpms ein/on
osd time out 60 sec
backlight 15
child lock mode off
Die angegebenen Werte sind Mittelwerte, die ab-
hängig vom LCD-Panel abweichen können.
Bei Austausch der Speicher oder der Chassisplatte
muss die zum LCD-Panel passende Software in-
stalliert werden.
TP 160 C
only for use in factory
Shows the panel resolution. It is a read only option and can not be set.
LCD TVs only: Gives information about the last update time of the SW running. It is a read only
option and can not be set.
LCD TVs only: Backlight on time option reserved.
Sets the prescale values for the input sounds entering the scart input of the MSP (Micronas So-
und Processor). Changing this value you can adjust the level of the output sound going to
loudspeakers for all the sources except the Tuners. The range is between 0 and 100.
Sets the prescale values for the Nicam standard sounds for tuner inputs. Changing this value you
can adjust the level of the output sound going to loudspeakers for Nicam sounds entering the ana-
log sound input of MSP. The range is between 0 and 100.
Sets the prescale values for the FM/AM standard sounds for tuner inputs. Changing this value you
can adjust the level of the output sound going to loudspeakers for FM/AM sounds entering the
analog sound input of MSP. The range is between 0 and 100.
Sets the input voltage going to IF decoder AGC pin. Changing this value you can adjust this volta-
ge for optimum Tuner performance. The range is between 0 and 31.
These are used for color bias adjustment. The range is between 0 and 255
Forces the video format to the desired format. Selectable formats are Auto, PAL, NTSC and SE-
CAM.
Gives information about the video colorspace input to PW181 IC. Do not change this value unless
an error occurred in the colors displayed.
Activates the internal pattern of PW181 IC. There are 3 choices: none, vert bars, solid color. None
will deactivate the internal pattern. Vert bars choice activates the bar pattern for the selected color
component. Solid color activates the solid pattern with one color selected in color component and
also you can change the level of the color by solid field level.
Selects the color for the internal pattern of PW181 IC. There are 4 choices: all, red, green and
blue. If you choose all, you can see the white pattern and if you choose one of the other choices
you can see the test pattern with the selected color.
This option will adjust the level of the colors for the test pattern. The range is between 1 and 64.
This option will enable or disable the Initial setup for the TV. Setting this option to On, the TV will
open from the Quick setup menu. Setting this option to Off will disable this option.
Factory reset option executes a reset operation for the NVRAM. Pressing OK when this option is
selected will erase the NVRAM and load default values to NVRAM.
This option selects the Power option for the TV. Setting this option to On the TV will switch to the
last state for power on transition. Setting this to Off will disable this option and the TV will always
switch to Stand-by state while power on transition.
This option sets the OSD timeout for the main menu structure. Selections are 5, 15 and 60 secs.
The default is 60 sec.
Intensity of the backlight
sets with keyboard - on; sets without keyboard - off
1 - 5
Service and Special Functions
Functions of the buttons
i (MENU)
P+ (Q) / P- (R)
( O ) / ( P )
Calling up the Service Mode
– Press button "i"
Menu "picture" appears.
– Enter service code "8500" ("9301").
Exit the Service Mode
– Press button "i"
Software Version Number
TP L6B
The software version number is shown in service
menu "version".
The above specified values are averages and can
vary dependend on the LCD panel.
A software which corresponds with the LCD panel
must be programmed after changing the memory or
the chassis.
Chassis P6
TP160C (TP L6B)
- Call up the Service Menu
- Activate menu point
- leave submenu
- Call up the dialogue line
(point of menu)
- Select submenu
- changing the settings
("MENU") on the remote control.
("MENU") on the remote control.