Toshiba Satellite L300D-ST3503 Resource Manual page 52

52
If something goes wrong
®
ExpressCard problems
ExpressCard
(Available on certain models)
❖ Make sure the card is inserted properly into the slot.
See "Using an ExpressCard
information about how to insert ExpressCards.
❖ Make sure all cables are securely connected.
❖ Occasionally a defective ExpressCard slips through quality
control. If another computer with an ExpressCard slot is
available, try the card in that machine. If the card malfunctions
again, it may be defective.
Resolving ExpressCard
Here are some common problems and their solutions:
The slot appears to be dead. ExpressCards
work no longer work.
Check the ExpressCard
1 Click Start, Control Panel, System and Maintenance, and
then Device Manager.
2 Double-click the appropriate ExpressCard, which will be listed
under one of the categories shown, for example: Disk drives,
Network adapters, Other, etc.
The operating system displays your ExpressCard's Properties
dialog box, which contains information about your
ExpressCard configuration and status.
The computer stops working (hangs) when you insert an
ExpressCard
The problem may be caused by an I/O (input/output) conflict
between the socket and another device in the system. Use Device
Manager to make sure each device has its own I/O base address.
See "Fixing a problem with device manager" in the electronic
user's guide for more information.
Since all ExpressCards
required to have its own address.
®
checklist
®
problems
®
status:
®
.
®
share the same socket, each card is not
®
" in the electronic user's guide for
®
that used to