Utilities - Toshiba Satellite L20-SP119 User Manual

Introduction
Panel Power On/Off
Low Battery
Automatic
Hibernation
Hibernation
Standby

Utilities

This section describes preinstalled utilities and tells how to start them.
For details on operations, refer to each utility's online manual, help files
or readme.txt files.
Please note that the descriptions for starting some Utilities are based on
setting the Control Panel to Category View. On Classic view the
description is different.
TOSHIBA Assist
HW Setup
1-10
This feature turns power to the computer off
when the display panel is closed and turns it back
on when the panel is opened. To specify the
setting, click start, Control Panel, Performance
and Maintenance, Power Options and
Advanced tab.
When battery power is exhausted to the point
that computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts down. To specify the setting, click
start, Control Panel, Performance and
Maintenance, Power Options and Alarms tab.
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk, when you
turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power
Getting Started, for details.
If you have to interrupt your work, you can turn
off the power without exiting from your software.
Data is maintained in the computer's main
memory. When you turn on the power again, you
can continue working right where you left off.
TOSHIBA Assist is a graphical user interface that
provides easy access to help and services.
This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To start
the utility, double click the TOSHIBA Assist on
your desktop, select OPTIMIZE tab , and click
TOSHIBA HW Settings.
section in Chapter 3,
User's Manual