Setting The Language - Viessmann VS 34 Owner's Manual

Programming the Water Softener
MODIFYING ROLLING SCREENS
During normal softener operation, four status screens
are shown in sequence (See "Softener Status Screens"
on Page 11). When the softener's electronic control is
first powered up, the default is to show all four. You
can turn on/off individual screens*:
1. From any of the rolling status screens, press the OK /
MENU button to display the Main menu.
2. Press the DOWN q button to scroll through the
menu options until Basic settings is highlighted
(See Figure 44).
Main menu
Recharge
Salt settings
Basic settings
3. Press the OK / MENU button to display the Basic set-
tings menu (See Figure 45).
Basic settings
Iron level
Recharge time
Rolling screens
4. Press the DOWN q button to scroll through the
menu options until Rolling screens is highlighted.
5. Press the OK / MENU button to display the Rolling
screens menu (See Figure 46).
Rolling screens
Salt status
Water use
Flow rate
6. Press the DOWN q or UP
through the list. Items with a black square next to
them will be displayed during normal operation.
7. To un-select a screen, make sure its name is high-
lighted in a box. Then press the OK / MENU button.
The black square will disappear. Pressing OK /
MENU again makes the black square reappear and
re-selects the highlighted item. At least one screen
must be selected/highlighted.
8. When selections are complete, exit this menu by
pressing the LEFT t button. The display will go
back to the Basic settings menu (Figure 45).
9. Press the LEFT t button twice to return to the rolling
status screens.
*
This does not include, errors, alerts or Recharge status
screens.
FIG. 44
FIG. 45
FIG. 46
buttons to scroll

SETTING THE LANGUAGE

When the softener's electronic control is first powered
up, a "wizard" screen prompts you to set the language
(See Page 10). To change the language:
1. From any of the rolling status screens, press the OK /
MENU button to display the Main menu.
2. Press the DOWN q button to scroll through the
menu options until User preferences is highlighted
(See Figure 47).
Main menu
Salt settings
Basic settings
User preferences
3. Press the OK / MENU button to display the User pref-
erences menu (See Figure 48).
User preferences
Language
Hardness units
4. Make sure Language is highlighted.
5. Press the OK / MENU button to display the Language
menu (See Figure 49).
Language
English
Español
Français
6. If the desired language already has a black dot next
to it (See Figure 49), go to Step 7. Otherwise, press
the DOWN q or UP
desired language, then press OK / MENU to choose
it. The choices are: English, Spanish, French, Italian,
German, Dutch, Turkish or Greek.
7. Press the OK / MENU button. The display will go
back to the User preferences menu (Figure 48).
8. Press the LEFT t button twice to return to the rolling
status screens.
TO RESET TO YOUR NATIVE LANGUAGE
IF ANOTHER LANGUAGE IS DISPLAYED:
From the rolling status screens, press OK / MENU.
Press DOWN q three times, then press OK / MENU
twice. Press DOWN q or UP
native language, then press OK / MENU twice.
Press LEFT t twice to exit all menus.
16
FIG. 47
FIG. 48
FIG. 49
buttons to scroll to the
to scroll to your