AEG AGT145 User Manual page 66

66 www.aeg.com
3.1 Dimensions
W1
H1
W2
Overall dimensions
H1
W1
D1
1) the width, height and depth of the appliance
without the handle
Space required in use
H2
W2
D2
1) the height, width and depth of the appliance in‐
cluding the handle, plus the space necessary for
free circulation of the cooling air
Overall space required in use
H3
W2
H2
D1
85°
H3
D2
1)
mm 845
mm 705
mm 545
1)
mm 945
mm 905
mm 690
1)
mm 1380
mm 905
Overall space required in use
D2 mm
1) the height, width and depth of the appliance in‐
cluding the handle, plus the space necessary for
free circulation of the cooling air, plus the space
necessary to allow door opening to the minimum
angle permitting removal of all internal equipment
3.2 Location
The appliance should be installed well
away from any sources of heat, such as
radiators, boilers, direct sunlight, etc.
• Place the appliance in a horizontal
position on a solid surface.
• Make sure that the appliance stands
level.
This can be achieved by two
adjustable feet at the bottom on the
left side of the appliance. Unscrew the
feet anticlockwise to set them higher.
• To achieve the best performance, do
not place the appliance below
overhanging wall units.
• Make sure the air can circulate freely
around the appliance.
If, due to different installation, proper
ventilation requirements are not
respected, the appliance will function
1)
690