Cleaning And Maintenance - Braun BT9440 Manual

Beard Trimming / Hair Clipping
Precision combs (1a, 1b): Place one of the precision combs (1a, 1b) over
the trimmer head (2a).
• Turn the length selector (3) to your desired cutting length. The comb
slides automatically up or down.
• Length settings precision beard comb (1a): 1 to 10 mm in 0,5 mm steps.
• Length settings precision hair comb (1b): 11 to 20 mm in 0,5 mm steps.
Fixed comb (1d): Click the comb onto the trimmer head (2a).
• Push the on/off button (4) to turn the appliance on.
• Trim against hair growth by guiding the flat comb part over the skin.
• Avoid clogging the comb with hair. Remove and clean it from time to time.
Precision and Contour Trimming
• Use the trimmer head (2a) without comb attachment, the detailed
trimmer head (2b) or the mini foil shaver head (2c) for shaping sideburns,
moustaches and partial short beards.
Travel lock
Press the on/off button (4) for 3 seconds to lock the appliance. A beep
confirms that the travel lock is activated. To unlock, press the on/off button
3 seconds. 3 beeps will sound when your unlock attempt failed. Try again or
simply connect the appliance to the mains.
Body grooming
Use the trimmer head only with the sensitive comb attached.

Cleaning and maintenance

• Switch off the appliance.
• Take off the head and combs.
• Use the brush to clean the head, combs and the appliance.
• Do not clean the foil of the mini foil shaver head with a brush as this may
damage it.
• The mini foil shaver head can be disassembled for proper cleaning. In
case the foil frame is pulled out, it can just be clicked into the housing
again.
• The handle, heads and combs can be cleaned under running water.
Rinse until all residues have been removed. Let dry completely before
reassembling them.
• To keep the attachments working properly, oil trimmers and foils with a
drop of light machine oil (not included) regularly.
14