Control Panel - AEG TSC7G181DS User Manual

3.5 Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.

4. CONTROL PANEL

ECOMETER indicator
1
Extra Cool button / indicator
2
Fridge compartment indicator
3
Alarm indicator
4
Door open alarm indicator
5
Freezer compartment indicator
6
Extra Freeze button / indicator
7
Filter Reset alarm button / indicator
8
Freezer temperature button /
9
indicator
Air filter change indicator
10
Fridge temperature button / indicator
11
Fan button / indicator
12
ECO button
13
4.1 Switching on
Connect the mains plug to the power
socket.
To select a different set temperature,
refer to "Temperature regulation".
If
to "Troubleshooting".
4.2 Switching off
1. Press and hold the freezer
temperature button for 5 seconds.
The display shows blinking
2. Once the appliance is switched off,
the display reads
1 2
13 12
appears on the display, refer
.
.
CAUTION!
At every stage of reversing
the door protect the floor
from scratching with a
durable material.
3 4 5 6
11 10 9
3. Disconnect the mains plug from the
power socket.
4.3 Temperature regulation
The temperature range may vary
between -15°C and -24°C for freezer and
between 2°C and 8°C for fridge.
Press the temperature buttons to set the
temperature of the appliance.
The recommended set temperature is:
• +4°C for the fridge
• -18°C for the freezer
You may set the recommended
temperature manually with temperature
buttons or by switching on the ECO
function. Refer to "ECO function" for
more information
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure, the
appliance goes back to the
set temperature.
4.4 Switching off the fridge
It is possible to switch off only the fridge
compartment leaving the freezer
compartment on.
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
ENGLISH
7 8
.
9