Troubleshooting - Siemens KI31R Series Information For Use

en Troubleshooting
13 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a
▶
special connection cable, which is available from the manufacturer or his
Customer Service.
Fault
After the appliance is
connected, it cannot
be heard and does
not cool. The displays
and lighting light up.
The appliance is not
cooling, the displays
and lighting are lit.
The LED lighting does
not work.
The warning tone
sounds.
The door alarm is
switched on.
The temperature dif-
fers greatly from the
setting.
20
Cause and troubleshooting
Not a fault. After connecting, it takes up to 8 minutes
until the appliance audibly starts.
No action required.
Showroom mode is switched on.
Carry out the appliance self-test. → Page 22
▶
a Once the appliance self-test has ended, the appli-
ance switches to normal operation.
Different causes are possible.
Call customer service.
▶
The customer service number can be found in the
enclosed customer service directory.
The appliance door is open.
Close the appliance door.
▶
Different causes are possible.
Switch off the appliance. → Page 15
1.
Switch the appliance back on after five minutes.
2.
→ Page 15
If the temperature is too warm, check the temper-
‒
ature again after a couple of hours.
If the temperature is too cold, check the temper-
‒
ature again on the following day.