Page 2
TTSCW-EES-100 Toshi: Courtyard Walls These are a series of icons that may be used throughout the instructions to help your assembly. If in doubt, scroll ahead to confirm. Do not glue this part Carefully score and This part - or its placement is fold this part completely optional Look closely at this step...
Page 17
TTSCW-EES-100 Toshi: Courtyard Walls The highlighted part must match the direction of the circled tabs (left). This remains consistant for all parts throughout the build.
Page 31
TTSCW-EES-100 Toshi: Courtyard Walls The highlighted part must match the direction of the circled tabs (left). This remains consistant for all parts throughout the build.
Page 73
TTSCW-EES-100 Toshi: Courtyard Walls Highlighted parts push on as far as the engraved line. Recommended to check following steps on pages 74 - 76 to see how it finishes.
Page 98
TTSCW-EES-100 Toshi: Courtyard Walls This is the position of the pieces from pages 96 & 97 for the following steps. Page 97 part, is highlighted...
Page 121
TTSCW-EES-100 Toshi: Courtyard Walls The two white walls are from pg119. You will need the reverse of the forward facing wall for the rear. The little detail pieces should face outwards on both sides...
Page 139
TTSCW-EES-100 Toshi: Courtyard Walls This door doesnt recquire gluing, so it can slide instead...
Page 140
TTSCW-EES-100 Toshi: Courtyard Walls Only glue the back of the static door (left) and tabs on the wall. Any glue in the long channel will stop the door from sliding...
Page 141
TTSCW-EES-100 Toshi: Courtyard Walls Keep glue clear from the door slide channel. Any glue will stop the door from sliding...
Page 163
TTSCW-EES-100 Toshi: Courtyard Walls This is the position of the pieces from pages 161 & 162 for the following steps. Page 162 part, is highlighted...
Page 167
TTSCW-EES-100 Toshi: Courtyard Walls Check position. Highlighted piece must attach to the wall as shown so to keep all connectors facing the same direction...
Page 182
TTSCW-EES-100 Toshi: Courtyard Walls Layout of the walls is optional as is glueing them together. For storage its recom- mended to not glue together. Some of the connectors may need filing to fit...
Need help?
Do you have a question about the TABLETOP SCENICS TTSCW-EES-100 and is the answer not in the manual?
Questions and answers