Page 2
TTSCW-EES-120 Toshi: Yagura Tower These are a series of icons that may be used throughout the instructions to help your assembly. If in doubt, scroll ahead to the next steps to confirm. Do not glue this part Carefully score and This part - or its placement is fold this part completely optional...
Page 25
TTSCW-EES-120 Toshi: Yagura Tower Highlighted parts slot into place. Super glue is recommended for a quick hold. Add both parts at the same time, aligning the outer edges to the surrounding walls...
Page 26
TTSCW-EES-120 Toshi: Yagura Tower Highlighted parts slot into place. Super glue is recommended for a quick hold. Add both parts at the same time, aligning the outer edges to the surrounding walls...
Page 106
TTSCW-EES-120 Toshi: Yagura Tower Highlighted parts have NO markings and on opposite sides to the circled “Flat”...
Page 107
TTSCW-EES-120 Toshi: Yagura Tower Highlighted parts have III engraved on them...
Page 108
TTSCW-EES-120 Toshi: Yagura Tower Highlighted parts are opposite to the side makred “flat”...
Page 109
TTSCW-EES-120 Toshi: Yagura Tower FRAGILE Over bending will cause this to break Do not bend freely...
Page 110
TTSCW-EES-120 Toshi: Yagura Tower Align the wall into the circled area first and gently bend the roof panel into place...
Page 111
TTSCW-EES-120 Toshi: Yagura Tower Align the wall into the circled area first and gently bend the roof panel into place...
Page 112
TTSCW-EES-120 Toshi: Yagura Tower FRAGILE: Take time with this step Focus on getting the walls to slot into the circled gap in the high- lighted part. Then gently pull the wall away from the highlighted roof to allow you to bend the roof until tabs slot into place.
Page 113
TTSCW-EES-120 Toshi: Yagura Tower Super Glue recommended for this part. Hold together until dry to maintain the arch shape. Tip: Align the out tabs (circled) on one side first and then the other, this should help align the other tabs into place...
Page 114
TTSCW-EES-120 Toshi: Yagura Tower Repeat the same process as the previous step...
Page 115
TTSCW-EES-120 Toshi: Yagura Tower Make sure outer triangle panels (last two steps) slot into the roof struts...
Page 116
TTSCW-EES-120 Toshi: Yagura Tower Repeat step for all corners...
Need help?
Do you have a question about the Toshi Yagura Tower and is the answer not in the manual?
Questions and answers