Advertisement
FRONT PANEL FACILITIES
@ PIONEER
Puan oorras evnrumaaea tunes F402 8
@ POWER (STANDBY/ON) switch/indicator
When the power is on, indicator lights.
?
ON oe eeeeee When set to ON position, power is supplied and the
unit becomes operational.
STANDBY ... When set to STANDBY position, the main power flow
is cut and the unit is no longer fully operational. A
minute flow of power feeds the unit to maintain
operation readiness.
Disconnect the power cord from the power outlet
when you do not plan to use the unit for a long period
of time.
NOTE:
'® The memory will be backed up so long as the power cord is not
unplugged.
@ /f the power cord is unplugged, the memory will be retained for
several days.
@ MPX (multiplex) MODE (AUTO/MONO) button
Mode changes as follows each time this button is pressed:
» AUTO
*» MONO
This button does not affect AM reception.
AUTO:
Depending
on
the
broadcast
station,
STEREO
or
MONO
is
automatically selected.
AUTO _| indicator lights up.
NOTE:
When the signal level is too weak for reception, sound output is
automatically muted.
MONO:
To receive stereo broadcasts in monaural.
MONO | indicator lights up.
NOTE:
This button's status is preset for each station in station memory.
6
<ARB1434>
@ RF ATT button
Set this button to on when receiving strong FM signals (nearby
stations) to reduce sound distortion ([RF ATT] indicator lights).
Normally, this button should be set to off.
NOTE:
This button's status is preset for each station in station memory.
@ BAND (FM/AM) selector buttons
FM:
Press to receive FM broadcasts.
AM:
Press to receive AM broadcasts.
@ IF BAND (NORMAL/SUPER NARROW) button
Each time this button is pressed the bandwidth of the IF circuit
switches between "normal" and "super narrow" for the FM band.
The selected bandwidth is displayed as follows:
The [NORMAL] or [SUPER NARROW) indicator lights up.
Set to SUPER NARROW in case of interference from other stations.
NOTE:
"ee
This button's status is preset for each station in statién memory,
© MEMORY button
Press to memorize preset stations. The | MEMORY | indicator will
remain lit for several seconds. Press the desired STATION CALL
buttons to memorize it during this period.
See page 9 for operational details.
@ TUNING + (up)/— (down) buttons
Use these buttons to tune in broadcasting stations. Press + (up) to
receive a station whose frequency is higher than the displayed
frequency, and — (down) to tune into a lower frequency station
STATION CALL buttons
Use these buttons to preset stations and to receive already preset
stations.
J
Advertisement
