Table of Contents
Advertisement
Electrical connections
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this
safety measure not be observed.
If the plug that is fitted to your appliance is not suitable
for your socket outlet, it must be cut off and the appropri-
ate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent
the hazard of shocks in case it should be plugged into a
13 Amp socket in another part of your home.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
-Green and Yellow
- Earth
Blue
- Neutral
Brown
- Live
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug, pro-
ceed as follows:
GREEN & YELLOW
13 AMP FUSE
Connect the green and yellow (earth) wire to.the termi-
nal in the plug which is marked with the letter «E» or the
earth symbol ~ or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Connect the brown (live) wire to the terminal in the plug
which is marked with the letter «L» or coloured red.
The plug moulded on to the lead incorporates a fuse.
For replacement, use a 13 Amp BS1362 fuse. Only
ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured insert
at the base of the plug.
A replacement cover/carrier must be obtained from your
local Zanussi Service Force Centre whose address is -
listed in the Customer Care Booklet which accompanies
your instruction manual.
CE
This appliance
complies
with the following
E.E.C. Directives:
s 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
s 89/336 EEC of 3.5.89 (Electromagnetic Compatibi-
lity Directive) and subsequent modifications.
Advertisement
Table of Contents
