Technics SL-HD301 Service Manual page 9

SL-HD301 / SL-HD501
installation of the disc tray after replacement ;
Operate the conversion lever, and then
locate the traverse deck to
: ; DOWN" position.
Operate the conversion lever, and then locate
the traverse deck ass'y to "UP" position. ;
aes Conversion
Traverse deck ass'y
Press the disc tray.
Installation of the CD servo P.C.B. after replacement
Step 3
Connect the FFC
Rest detect
switch
Install the CD
servo P.C.B.
in the traverse
deck ass'y.
ad Install the
Move the drive ruck
Supporting the disc tray manually,
engage the drive gear (B)ass'y
Drive gear (B) ass'y with the gear and then slide to
stop the disc tray.
Marking "<q"
x Rotate the gear to move
the side A of optical
pickup toward the outer
edge from the marking
Before installing the CD servo P.C.B., move the optical
ickup toward the outer edge from the mark "q" .
TOtherwise, the rest detect switch oe mounted on Disc tray
the CD servo P.C.B. may be damaged.