Advertisement
.................
........ SC
D _}_QSO'VC(_O5
9
4
Select a backup PC.
• If you have performed a backup before, skipto step 4.
Select
OK.
• To cancel sending, select Cancel.
• You cannot select individual files to backup. This function
backs up only new
files on the camera.
• The backup's progress will be shown on the PC monitor.
• When the transfer is completed, the camera will turn off automatically
in
approximately
30 seconds. Select Cancel to return to the previous screen and
prevent the camera from turning off automatically.
• To turn offyour
PC automatically
after the transfer is complete, press [MENU],
and then select Shut down PC after backup
_ On.
• To change the backup PC,select Change PC.
o When you connect
the camera to the WLAN, select the AP that is connected
to
the PC
o The camera will search for available
access points even if you are connecting
to
the same access point again.
If you turn offthe
camera or remove the battery
while sending files, the file
transfer
will be interrupted.
• While you are using this feature, the shutter
control is disabled
on your camera.
• You can connect only one camera to the PC at a time for sending files.
The backup may be canceled due to network
conditions.
Photos or videos can be sent to a PC one time only. Files cannot be sent again
even if you reconnect
your camera to another
PC.
When there are no files in the camera memory, you cannot
use this feature.
• You must turn offWindows
Firewall and anyother
firewalls
before using this
feature.
You can send up to 1.000 recent files.
• On the PC software,
the server name must be entered
in the Latin alphabet
and
can contain
no more that
48 characters,
When multiple
file types are created at once, only the image files (JPG) will be
sent to the PC with this feature.
Wireless network
(ST150F/ST151 F/ST152F only)
111
Advertisement
