Sony HT-DDWG700 Operating Instructions Manual page 6

About the indicators on the display
Name Function
[] SW
[] LFE
[_ r][3 D
[] Dr] PL/
Dr] PLII
Lights up when tile audio signal
is output from the SUB
WOOFER jack.
Lights up when tile disc being
played back contains an LFE
/Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
Lights up when tile receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc. be sure that you
have made digital connections
and that INPUT MODE is set to
"A13TO" (page 43).
"Drl PL" lights tip when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
"Drl PLIF' lights up when the
Pro Logic I1 Movie/Music
decoder is activated.
[] OPT Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
.jack.
Name Function
[] DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc. be sure that you have made
digital connections and that
INPUT MODE is set to
"A1JTO" (page 43).
[] MEMORY Lights up when a memory
function, such as Preset
Memory (page 41), etc., is
activated.
[]
Tuner
Lights up when using the
indicators
receiver to tune in radio stations
(page 39), etc.
[] Preset Lights up when using the
station
receiver to tune in preset radio
indicators
stations. For details on
presetting radio stations, see
page 41.
[] D.RANGE Lights up when dynamic range
compression is activated (page
28).
[] COAX
Lights up when DVD/BD input
is selected. However.
"UNLOCK" appears on the
display if no digital signal is
input through the COAXIAL
jack.
6us