Dual-Mono Configuration - Devialet 440 Pro Dual Manual

DUAL-MONO CONFIGURATION

The Dual-mono feature is used to devote all of an Expert's capacities to a single speaker and to radically
increase your system's performance.
This function requires two Expert units and a configuration of each device via the Configurator.
In this configuration, one device is called the Master device. This is the Expert that receives the signals from
the remote control. The Companion device receives information from the Master device.
To configure your system in dual-mono mode, connect each speaker to a device and connect
them using a digital cable (S/PDIF or S/PDIF-AES/EBU).
If you wish to use your Companion device's inputs, connect both devices using a stereo mini-jack
analogue cable.
Other configurations are also possible via the configurator.
They will enable you to meet all your expectations and to significantly boost your system's performance.
27