Table of Contents
Advertisement
KRX-593/793
* After removing the case, perform disassembly for repair as follows.
1) Removing the front panel
1g
2. Remove the nine screws (@).
3. Remove the front panel in the direction of arrow.
2) Removing the cassette mechanism and PC board
1.
. Disconnect the control cable from CN901
and CN902
. Remove
the two screws
(@), then remove
the PCB
. Remove the two screws, then remove the lead plate (@).
. Remove the eight screws and two springs (@), then re-
. Remove the thirteen screws (@), then remove the PC
. Remove the EJECT knobs (@).
DISASSEMBLY FOR REPAIR
Remove the two knobs (@), and two screws (@).
Note: When checking the electrical operation, connect
the ground of front panel side with the ground of
main side.
Disconnect the head lead from CN301
and CN302 of
PCB-REC/PLAYBACK
(@), then cut the wire band.
of PCB-REC/PLAYBACK (@).
SP.JACK.
move the cassette mechanism.
boards.
Advertisement
Table of Contents
