Disassembly For Repair - Kenwood KR-A4010 Service Manual

KR-A4010
DISASSEMBLY FOR REPAIR
Befor repair work, take out the case.
1. Remove the five screws, then detach the front panel
(@).
2. Remove the two screws then undo the catch of the
sub panel (@ ).
3. Remove the one screw (@ ).
4. Undo the catch of the PHONES, then detach the
PONES boad (X14-) (B/3) (@ ).
5. Detach the knob using a screwdriver (@).
6. Undo the catch, then the knob (@).
7. Remove the one screw (@) and the one hook (@),
then detach the PCB.
8. Remove the one screw (@), then detach the power
switch.
9. Remove the six screws (@) and the twelve
screws (@ ), then detach the display board (X11-)
(A/2).