TCAS
Touch the Menu key to view the Traffic menu.
Key
ADS-B Display
TCAS Status
Test
Motion Vector
Vector Duration
Altitude Filter
20
Traffic Menu
Controls the display of ADS-B traffic.
Touch to set TCAS into operating mode or standby mode.
The Test key places the traffic system in test mode and
also tests the communication between the GTN and the
configured traffic device.
Touch to set the type of motion vector. Selections: Absolute,
Relative, Off
Touch to set the time used to calculate the motion vector
length. Selections: 30 sec, 1 min, 2 min, 5 min.
Touch to select what traffic to display. Selections: Below,
Normal, Above, Unrestricted
GTN 725/750 Cockpit Reference Guide
Description
190-01007-04 Rev. L