Tektronix 7D01 Instruction Manual page 5

7D01 Operators (SN BO20000 & up)
SAFETY SUMMARY
The following safety information is provided to ensure safe operation of this instrument. WARNING information is intended
to protect the operator; CAUTION information is intended to protect the instrument. The following are general safety pre-
cautions that must be observed during all phases of operation and maintenance.
To reduceelectrical-shock hazard, the mainframe (oscilloscope) chassis must be properly grounded. Refer to the mainframe
manual for grounding information.
Ground the Instrument
Do Not Operate in Explosive Atmosphere
Do not operate this instrument in an area where flammable gases or fumes are present. Such operation could cause an
explosion.
Avoid Live Circuits
Electrical-shock hazards are present in this instrument. The protective instrument covers must not be removed by operating
personnel. Component replacement and internal adjustments must be referred to qualified service personnel.
Do NotService or Adjust Alone
Do not service or make internal adjustments to this instrument unless another person, capable of giving first aid and resusci-
tation, is present.