Dell VxRail P570 Owner's Manual page 29

● LDAP user
If secure default access to iDRAC is used, the iDRAC secure default password is available on the back of the appliance
Information tag. If you have not opted for secure default access to iDRAC, then the default user name and password are root
and calvin. You can also log in by using Dell SSO or Smart Card.
The following prerequisites are a must to log in to iDRAC:
● You must have iDRAC credentials.
● Ensure that you change the default user name and password after setting up the iDRAC IP address.
The iDRAC IP address is pre-configured for DHCP. This can be changed to a static IP address by logging into iDRAC.
● To access iDRAC, connect the network cable to the Ethernet connector 1 on the system board.
● Ensure that you change the default username and password after setting up the iDRAC IP address.
Pre-operating system management applications 29